 |
CB-Racing |
Back to Main Page |
| Roadster Bags | ||
| Christopher Brown Racing | Bag Sizes | |
| Installation | Frequently Asked Questions | |
| Ordering Information |
How to Install your CB-Racing Roadster
Bag:
(click on the picture for
a larger version)
Step 1: This is easiest with the top down. Next, remove the windscreen if it is installed.
Step 2: Take the roll bar straps and feed them around the roll bar as in the pictures below. Loop around and back through the clip. Firmly pull back on them to assure tightness. Rotate the clip around so that it is behind the bar and out of site. The strap on the left shows a finished strap. Any excess strap gets placed behind (out of sight) the roll bar and held down by the clip when rotated back.
Step 3: (Optional 4 strap model) Take the seat belt recepticle clips and attach them as shown on each side. They clip directly below the recepticle.
Step 4: Lay the bag in place and clip all buckles. Tighten the staps to your desire. The straps may stay in your car at all times. To take the bag in and out, simple clip and unclip the buckles!
Step 5: Reinstall the windscreen if you have one. Enjoy your new extra storage!